|
Applicable syringe size
|
2/3ml ,5/6ml ,10/12ml,20ml,30/35ml ,50/60ml (Syringe size can be automatically recognized)
|
|
Flow Rate
|
2/3ml:0.01～160ml/h5/6ml:0.01～400ml/h10/12ml:0.01～800ml/h 20ml:0.01～1600ml/h30/35ml:0.01～2400ml/h 50/60ml:0.01～3000ml/h
|
|
Rate Step
|
0.01ml/h
|
|
BOLUS Rate & VTBI(Volume to beinfused)
|
2/3ml Syringe:0.01～160ml/h 0. 1～2ml5/6ml Syringe:0.01～400ml/h 0. 1～5ml10/12ml Syringe:0.01～800ml/h 0. 1～10ml20ml Syringe:0.01～1600ml/h 0. 1～20ml30/35ml Syringe:0.01～2400ml/h 0. 1～30ml50/60ml Syringe:0.01～3000ml/h 0. 1～50ml
|
|
BOLUS Rate step
|
0.01ml/h
|
|
FF (Fast Forward)
|
2/3ml Syringe:0.01～160ml/h5/6ml Syringe:0.01～400ml/h10/12ml Syringe:0.01～800ml/h 20ml Syringe:0.01～1600ml/h30/35ml Syringe:0.01～2400ml/h 50/60ml Syringe:0.01～3000ml/h
|
|
FF volume range
|
0 ~maximal volume of syringe
|
|
Manual KVO Rate
|
0.01～30.0ml/h (0.01ml/h step)
|
|
Manual KVO Volume
|
2/3ml:0.01～0.2ml (0.01ml step)5/6ml: 0.01～0.2ml (0.01ml step) 10/12ml: 0.01～0.2ml (0.01ml step) 20ml: 0.01～0.5ml (0.01ml step)30/35ml: 0.01～0.5ml (0.01ml step) 50/60ml: 0.01～1ml (0.01ml step)
|
|
VTBI (volume to beinfused)
|
0～99999.99ml, (0.01ml step). When the preset amount volume is 0, no infusion amount limit is indicated
|
|
Cumulative infusion volume range
|
0～99999.99ml, (0.01ml step)
|
|
Rate accuracy
|
Within ±1.8% (after calibration)
|
|
Mechanical accuracy deviation
|
Within ±0.5%
|
|
Pressure Units
|
MPa ,kPa ,mmHg,inH2O ,psi ,mbar
|
|
Occlusion pressure
|
Level 1-16 (10 , 20 , 30,40 , 50 , 60 , 70 , 80 , 90 , 100 , 110,120 , 130 , 140 , 150 , 200) kPa,Occlusion pressure levels 14, 15, and16 are not suitable for 50/60ml syringes
|
|
Alarms
|
Infusion finished, near infusion end, VTBI completed, near VTBI end, extension tubing off(optional), KVO completed, pre-occlusion alarm(optional),abnormal running state, infusion is blocked, syringe falls off, syringe is improperly installed, forgotten operation, low battery, battery empty, equipment failure, power failure, battery disconnected, communication interrupt(optional), standby task completed, cascade failure, cascade completed, etc.
|
|
Prompts
|
Parameter overrun ,infusion begins ,AC power has been pulled out , Speed overrun , Uncalibrated accuracy , Drug favorites has reached limit ,Pump Call, etc.
|
|
Maximum infusion pressure
|
Within 250Kpa
|
|
Maximum infusionvolume under singlefault condition
|
0.2ml
|
|
Data transmission delay
|
The total delay time for data transmission between pump and the infusion management system host software /infusion central stationsoftware is ≤10s
|
|
Power source
|
Input: 100~240VAC, 50/60Hz;Internal rechargeable: Li battery 11. 1V, capacity≥2600mAh (or3350*2mAh optional), After the battery is fully charged, with wifi set to "off" and screen brightness set to " 10",it can be used for A/B syringe pump to work continuously for more than 4 hours at a rate of 5ml/h by 2600mAh capacity battery( or 10 hours, 3350*2mAh capacity battery), and for more than 3hours at a rate of 3000ml/h by 2600mAh battery(Or 9hours, 3350*2mAh capacity battery).External DC power supply: input voltage 10V-16V, input current 2.5-1.5A.
|
|
Power Consumption
|
50VA
|
|
Fuse Specification
|
T2A/250VAC
|
|
Equipmentclassification
|
Class I Type CF, continuous operation equipment
|
|
IP classification
|
IP44
|
|
Ambient environment
|
Temperature: +5℃~+40℃Relative humidity: 20%~90%Atmospheric pressure:54.0kPa~ 106.0kPa
|
|
Transport & Storage conditions
|
Temperature: －20℃~+55℃Relative humidity: ≤95%Atmospheric pressure:50.0kPa～106.0kPa
|
|
Screen size
|
7-inch touchable display screen
|
|
Dimensions
|
384mm(L) ×223mm(W) ×231mm(H)
|
|
Net weight
|
Approx:3.6kg
|
|
Gross Weigh
|
Approx:4.6kg
|
|
Safety standardsSafety standards
|
GB9706.1 Medical electrical equipment -- Part1: General requirements for basic safety and essential performanceGB9706.224 Medical electrical equipment -- Part2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllersYY0706.108 Medical electrical equipment -- Part1-8: General requirements for basic safety and essential performance - Collateral Standard:General requirements, tests and guidance for alarm systems in medicalelectrical equipment and medical electrical systems.
|
|
ElectromagneticCompatibilityStandard
|
YY 9706.102-2021 Medical electrical equipment—Part 1-2:General requirements for basic safety and essential performance—Collateral standard:Electromagneticcompatibility—Requirements and tests.
|
|
Ambulance standard
|
Meet the requirements of the EN 1789 standard.When used in ambulances, the adaptation is expanded as follows:The temperature range during continuous operation is: 0-40℃;The transportation and storage temperature range is: -30~ 70℃;Transient working conditions: After storage at room temperature (20℃), the equipment can operate normally at -5℃ .When operating in -5℃ , the infusion liquid may solidify and cause a blocking alarm.It is recommended to use it within the normal operating temperature range.The bolus precision is: when ≤1ml, ±3.5%, when >1ml, ±1.8%.
|
|
Recommended Infusion sets
|
See Chapter 17. Any brand of syringes can be used after correct calibrated.
|
|
Applied part
|
Syringe extension tube
|
EN 
AR
ES
TR
RU
PT
RO
HU
BG
CS
NL
FR
DE
EL
IT
BE
GA
MS
AF
SV
LV
GD
TG
UZ
SU
TA
